Precautions for the operation of chain plate conveyors

2025-07-01 10:14:30

Generally, the Chain plate conveyor needs to be started with a turbofan to avoid motor overload and deviation of the stainless steel chain plate; before shutdown, except for special circumstances, all raw materials on the stainless steel chain plate should be unloaded. The starting sequence for shutdown and transportation of multiple devices is to turn on a chain plate Conveyor at the tail end to unload the stainless steel chain plate, then proceed forward in sequence, start the receiving belt conveyor at the tail end, and shut down in the reverse order of the starting sequence.

Nowadays, chain plate conveyors have long been widely used in various transportation fields. Then, how to ensure the normal operation of the chain plate conveyor after inspection and maintenance? Let's briefly take a look: What inspection operations need to be done before the chain plate conveyor is transported? The chain plate conveyor is not suitable for stopping and starting when fully loaded, and cannot reverse.

When feeding the chain plate conveyor, it should be carried out symmetrically, and the maximum size of the fed materials should be adjusted within the required specifications. The chain plate conveyor should regularly check the grooves on the bottom plate and the screw connections of the chain plate conveyor. Once looseness is found, it should be properly handled. The reducer of the chain plate conveyor needs to be disassembled and replaced with new lubricating grease 7-14 days after the start of transmission, and then can be disassembled and replaced every 3-6 months according to the situation.

The tightness of the traction chain of the chain plate conveyor should be appropriate and should be inspected regularly. If necessary, adjust the adjusting screws of the tensioning device. Lubricant should be added to each lubrication point of the chain plate conveyor in a timely manner. After the maintenance of the chain plate conveyor, the above work should be done well. Only in this way can the strong functions of the belt conveyor be fully demonstrated.